Download Demo Programs

You may see evolution in dynamics. Examples of genetic algorithm optimization for different tasks may be downloaded from this page.

All examples use programs for Windows98/XP with screen area 800 by 600 pixels (several programs have switch between 800 / 600,  1024 / 768 and 1280 / 1024 screen area).

 All initial data are included in corresponding EXE file. No any additional files are created. . Output is only to the screen and it’s possible to save result’s picture.

Maybe sometimes it would be necessary to start program again to get better results. It’s chosen optimal time/quality population of generations. To get more stable results it’s necessary to increase population and number of islands

It’s evolution and every new start of the computer – new results, with some differences bigger or smaller from time to time.

You may use any download agent: browser, Get Right, Flash Get, etc.

1.Download setupGA.zip file (1.94 MB), unzip it to any folder and run setup.exe to install necessary components (file setupGA.exe in a new folder after installation may be deleted).

Maybe you already have these components in your computer. So first try to run any demo file, if fail – then download setupGA.zip file.

2.Download any demo file, UnZIP and run it.

3.Uninstall – standard for Windows: Control Panel – Add / Remove Programs - GA.

Examples have from 3 to 5 islands with 52 members in every one. To get sufficient results it’s necessary at least 1000 - 2000 generations – so it would be several hundred thousands calculations for objects and it would take from 2 to 15 minutes ore more on 3 GHz PC.

Maximum number of generations in examples is 2000, but you may stop earlier if results are sufficient.

All buttons have ToolTipText - when cursor hovers it describes function.

Install necessary components (these are only additional Window's libraries)

Download setupGA.zip (1.94 MB) 

Demo Examples

NN Program Set for Optimal Design of Material Objects

Download NN Program Set demo (421 kB)

NN Program Set for Optimal Design of Material Objects - design and train Neural Network (NN) with Genetic Algorithms (GA), find optimal solution for multiobjective problem on base of NN with GA and on the base of micro-GA for a very small population of material objects with experimental study for every generation:

1. NNdesign – design and train Neural Network on the base of Genetic Algorithms.
2. NNoptimum – find optimal solution for multiobjective problem on base of Neural Network with Genetic Algorithms.
3. NNcalc – viewer and calculator for Neural Network.
4. GAreal - find optimal solution for multiobjective problem on base of micro-GA for a very small population of material objects with experimental study for every generation - direct measurements in the real world are used.

Tools to search for new materials and technological processes on base of laboratory measurements.

Experiment Forecast with NN and GA

Download Help_forecast (62 kB)

Experiment Forecast with NN and GA - method for prediction of experimental results without models and hypotheses on the basis of two databases: “past” and “present”. These may be the results of the same phenomenon on different time steps (last year or month and now, for example) or it may be measurements not connected with time for similar objects. Such objects and phenomena may be of any nature: mechanical properties of construction materials, chemical reactions, water supply and wastewater, stock exchange, sport competitions, games etc.

Pumps Schedule

1. Download demoWAPIRRA.zip (188 kB)

Use of Genetic Algorithms In Optimization of Irrigation Pumping Stations -  A genetic algorithm approach is used for the optimal design and operation of irrigation pumping stations that result in minimum design and operating cost. Examples of results for full functional copy of program with Excel are included.

2. Download demoWPCY.zip (125 kB)

Genetic Algorithm Optimization Of Water Supply Pumps Schedule - optimization of a pump scheduling system so as to minimize the cost of pumping over a 24-hour period. A pump scheduling system delivers water to a reservoir from an assumed infinite water source. Each pump may have its own characteristics. 

Structural Mechanics (FrameGA 3D demo - space problem)

Program FrameGA 3D for Optimal Design of Trusses - a genetic algorithm approach is used for optimization of space frames so as to minimize the weight of the structure.

1.Demo versions of program  FrameGA 3D (run after download, simple and fast, data are in programs).

Download demoFrameGA3D.zip (314 kB)  – Demo version of program  FrameGA 3D (common case).

Download demoFrameGA3D_MSFM.zip (344 kB) (forses+wind+ forbidden zones+ optimal position of supports+ load combinations).

2.Download View3Ddemo.zip (117 kB)  – Demo version of program  View3D (viewer for results of program FrameGA 3D).

3. Download Help3Ddemo.zip  (205 kB)  – More information about program and additional components.

Examples ( Excel files with results, program View3D is necessary to see graphic results ).

Download excommon.zip (183 kB)

Download exspecial.zip (507 kB)

Download exfobidden.zip (520 kB)

Download exmultiload.zip (517 kB)

Structural Mechanics (FrameGA 2D demo - plane problem)

Program FrameGA for Optimal Design of Trusses - a genetic algorithm approach is used for optimization of trusses so as to minimize the weight of the structure.

Download exceldemo.zip (56 kB)  – example of input data and output results for full functional copy of program with Excel and pictures of optimal and standard frame with Help file.

1. Download example1.zip (173 kB)

2. Download example2.zip (173 kB)

3. Download example3.zip (173 kB)

4. Download example4.zip (173 kB)

5. Download example5.zip (173 kB)

6. Download example6.zip (173 kB)

7. Download example7.zip (173 kB)